

Omitec, the UK’s leading independent diagnostic and test equipment manufacturer are again attending Automechanika in Frankfurt this September.
Omitec can be found at their usual location, Hall 8 Stand E0.8. The company will be talking to OE manufacturers about their bespoke solutions including Engineering Development Tools, On Vehicle Electronics, Hybrid Vehicle Technologies and Wiring Harness Design, all of which are manufactured from idea to final product in-house.
The company will also display products for their aftermarket division such as the OmiCheck, the tool that extracts live data and fault codes from the control modules, and the OmiScan; Omitec’s flagship diagnostic tool.
If you are interested in Omitec’s range of products and services, they would be delighted to welcome you on stand. Should you wish to make an official appointment please contact Katherine Murphy on +44 (0) 7917 710508.
As of the 1st January 2012 the MoT Test will incorporate a malfunction Indicator Lamp (MIL) check. This will call for the examiner to visually check that warnings lights for ESP, SRS, ABS and TPMS are not permanently illuminated. This will come into effect from January 1st but will be highlighted as an advisory item only until March 31st. From April 1st onwards, vehicles will fail an MOT if these lights are illuminated. Warnings lights or MIL that are to be noted if illuminated include ESP; Electronic Stability Programme, SRS; Safety Restraint System, ABS; Anti-Locking Brake System, and TPMS; Tyre Pressure Monitoring System.
Although diagnostic kit is not required to carry out the visual check of these warning lights, a diagnostic scan tool can read the fault code and establish the precise problem, allowing garages to then fix the fault and proceed to reset the warning light. Therefore having a diagnostic tool can aid garages in two essential ways. One, in terms of customer service, so garages can at least highlight the precise problem to customer. Also for garages that repair and service in addition to MoT increased revenue can be generated from locating, fixing and resetting faults without sending the car to a diagnostic specialist.
Omitec, offer a product that fits the bill perfectly for this requirement. The OmiCheck Service is a simple to use and cost effective tool that is a must for any garage performing repair, service and MoT activities. It is also ideal as a low cost addition to your existing diagnostic kit, particularly suitable for use in the MoT Lane. It’s simple to use menu system allows every technician locate faults with ease. Applications include; ABS, SRS (Airbag), Climate Control, Electronic Park Brake, Service Reset, Steering Angle Sensor and Tyre Pressure Monitoring.
The OmiCheck Service is fully upgradable to the full diagnostic suite, OmiCheck Professional, and both have the advantage of never switching off. OmiCheck Professional has all of the servicing capabilities of the OmiCheck Service tool but also covers some in depth diagnostic applications on a wide range vehicle manufactures with such as Seat Electrics, Climate Control, Injector Configuration, Engine Management, Body Control Unit, Electronic Suspension, Transmission, Key/Remote Programming, Steering, Park Distance Sensors, Particulate Filter, Security & Lighting to name but a few.
Whatever yours diagnostic needs, talk to Omitec, they will guide you through the diagnostic choice process and demonstrate the products at your premises, so you get the right diagnostic product for you. Call the Omitec sales desk now on 0844 665 7688.
Omitec are pleased to announce that their flagship product, the OmiScan will be available with three years’ worth of updates up until 30th April 2012.
Until recently, this serial diagnostic tool has been offered with twelve months of updates, however for a limited period only, this is being extended by another two years!
If this wasn’t reason enough to purchase an OmiScan tool, it has recently been updated to included even wider and deeper manufacturer coverage than ever before. More recent manufacturers added include Jaguar and Hyundai, and extended coverage has been added to the existing manufacturers covered, such as BMW, GM, Ford, Mazda, Mercedes, Land Rover and Saab.
Brian Rance, UK Sales Director for Omitec believes that “this is an exciting time for Omitec. We truly believe we have one of the best value for money serial diagnostic tools available. Three years’ worth of updates mean our customers will benefit from up to date coverage of a wide range of vehicles right through until 2015 without paying the annual subscription fee of £399. It is a great saving for our customers in these tough economic times”
For more information about the OmiScan, or any other products from Omitec, please contact our sales team on 0844 665 7688
Omitec, one of the leading manufacturers of diagnostic equipment in the UK, have a range of scan tools that can fit any budget and diagnostic requirement. From essential equipment for servicing work, right through to in depth diagnostic work; the Omitec range has it covered. Omitec have a diagnostic tool for every level, these come in the form of a Service, Advanced and Professional diagnostic tool, represented by the Omitec products; OmiCheck Service, OmiCheck Professional and the OmiScan.
Service Level Diagnostics - OmiCheck Service is a simple to use and cost effective tool that is a must for any garage performing service activities. It is also ideal as a low cost addition to your existing diagnostic kit. It’s simple to use menu system allows every technician to get on with the task in hand. Applications include; ABS, Airbag, Climate Control, Electronic Park Brake, Service Reset, Steering Angle Sensor and Tyre Pressure Monitoring. The OmiCheck Service is fully upgradable to OmiCheck Professional, and both have the advantage of never switching off.
Advanced Level- OmiCheck Professional has all of the servicing capabilities of the OmiCheck Service tool but also covers some in depth diagnostic applications on a wide range vehicle manufactures with such as Seat Electrics, Climate Control, Injector Configuration, Engine Management, Body Control Unit, Electronic Suspension, Transmission, Key/Remote Programming, Steering, Park Distance Sensors, Particulate Filter, Security & Lighting to name but a few.
Professional level - OmiScan this unit has been developed to dive deep into vehicle diagnostic functions as well as being exceptionally easy to use. All hardware is built into the handset; this enables 1 cable to connect to all post 1996 vehicles fitted with a 16-pin connector. Legacy cables are also available. Updates are 3 times a year by CD, or constantly available to download from the Omitec website. The OmiScan will not switch off, if not updated.
The OmiScan covers a vast number of vehicle manufacturers including the applications such as:- ECU programming, Electronic Parking Brakes, Service Light Reset, Immobiliser, Body Control, Transmission, Security, Climate Control, Electronic suspension, Cruise Control, Park Distance Control, Electro–Hydraulic Power Steering, Particulate Filter and Steering Angle Sensor - with more coming shortly. This makes the OmiScan the ultimate choice on the market for the professional workshop.
Whatever yours diagnostic needs, talk to Omitec, they will guide you through the diagnostic choice process and demonstrate the products at your premises, so you get the right diagnostic product for you. Call the Omitec sales desk now on 0844 665 7688.
Omitec is delighted to advise that it has appointed a new distributor for Spain to market its range of Autodiagnos, Omitec and Crypton products. The new distributor is called Uricar Automocion of Gernika. Uricar has many years’ experience of distributing and supporting diagnostic test equipment in Spain.
Omitec Chairman said “We are delighted to find a new distributor for this important market that is committed to developing the sales and support of our companies. In the Omitec, Autodiagnos and Crypton brands we have an excellent range of diagnostic and other garage equipment. We have been too quiet for too long in Spain”
Uricar’s owner, Jesus Uriarte said “We are proud to represent the Omitec brands in Spain, which hold great prestige in the professional fields of automotive diagnosis. Their reputation for constantly developing new software ensures that the end user can cope with increasingly complicated technology”
Omitec is delighted to advise that it has been awarded a contract by Viking, the Road Side Assistance Company of Norway to supply its’ subcontractors with diagnostic test equipment.
The diagnostic tool called “Viking Diagnostic Assistant” has been developed over many years to provide the technician with the most cost effective tool available today. Quicker road side repairs are made along with more accurate decisions on whether to tow the vehicle. A high majority of vehicles can be addressed with the Diagnostic Assistant and regular updates from Omitec will keep the product fixing cars for a long time to come.
For further information please contact:
Julian Soanes
Managing Director Omitec OEM Service Solutions +44 1380 732 000
Katherine Murphy
OEM Marketing Manager +44 1380 732 000
Omitec is delighted to advise that it has been awarded a contract by Mahindra & Mahindra, India to supply its’ dealers with diagnostic test equipment.
This project is being rolled out initially to European franchised dealers of Mahindra. The diagnostic platform comprises Omitec innovative OmiConnect hardware and OmiTechcentre software, along with a PC and an oscilloscope.
The launch of the next generation diagnostic platform coincides with Mahindra’s launch of a new vehicle – Scorpio.
For further information please contact:
Julian Soanes
Managing Director Omitec OEM Service Solutions +44 1380 732 000
Katherine Murphy
OEM Marketing Manager +44 1380 732 000
Omitec is delighted to advise that it has been awarded a contract by Telsa Motors of California, USA to provide Technical Publications for the new model ‘S’ car.
This project encompasses the provision of workshop information and owners literature. Both projects are leading edge solutions. The owners information is lodged on the vehicle hard drive and is viewed on the in car display. By using the latest technology the information is provided with exceptional clarity and interaction with the driver.
The workshop information too has innovative technology with disassembly and assembly information provided in words and moving graphics.
Omitec is delighted to advise that it has been awarded a contract by Fisker Motors, of California, USA to provide Dealer Special Tools and Support for the new model Karma car.
This contract manages the special tools supply chain of the Global Dealer network of Fisker Motors. Each dealer has an Essential Tool requirement and a number of recommended tools. Omitec though its’ subsidiary companies will ensure that all dealers receive the necessary tools and support in time for vehicle launch.
Thereafter, Omitec will provide a supply of tools on an as required basis for existing and new dealers.
Inventory will be held in both the major markets of the USA and Europe.
Omitec is delighted to advise that it has been awarded a contract by National Tyres and Autocare to supply Diagnostic Tools and Support for the NTA branch network in the UK.
Omitec will be supplying the market leading OmiScan II professional diagnostic scan tool. This tool is being rolled out to the 227 branches over the summer months. Each branch receives initial training and then has access to the Omitec Support line for on-going information.
Each tool is updated on a continuous basis with the latest software releases from Omitec.
Omitec Chairman, John Watkins, said “We are delighted to be working closely with NTA to provide the best in diagnostic tools and support. We take it as a strong recommendation of the OmiScan and Omitec, that NTA selected us following an extensive competitive assessment.”
NTA Project Manager, Mike Garwood said, “National Tyres and Autocare are expanding both the network of branches and the type of service work undertaken. We have been very pleased with the OmiScan product and the support that we have received from Omitec during the launch and training phases. Our technicians are finding the tool very capable and easy to use, enabling NTA to provide additional service work to our customers.”
For further information including a list of applications on the OmiScan II contact the Omitec sales office on +44 (0)844 665 7688
Omitec Group is pleased to announce the establishment of a division specialising in the provision of design services to electric car manufacturers.
This division will undertake complete projects in all aspects of the electrical design phase, diagnostic and technical publication consultancy for after sales and supply and support of service bay equipment.
The establishment of this new business follows a number of contract awards by electric car companies over the past two years. As a result, Omitec has developed considerable specialist skills in the particular field of the automotive industry.
Omitec Chairman, John Watkins said “Omitec is pleased with the progress we have made in providing engineering solutions to the electric car companies. This new division is to continue the focus on the rapidly expanding growth of low emission vehicles. We are delighted to play our part in the greening of our world.”
Omitec are pleased to announce the launch of the New OmiScan, this unit has been developed to dive deep into vehicle diagnostic functions as well as being exceptionally easy to use. Using our experience of producing the OmiScan classic, which has been available for 6 years, Omitec have taken all the best features and have enhanced these with a brand new machine...
The New range of single application diagnostic tools from Omitec
Omitec, the UK’s leading independent diagnostic and test equipment manufacturer is pleased to launch the new OmiNspect range of single application diagnostic tools.


Omitec, the UK’s leading independent diagnostic and test equipment manufacturer, is pleased to launch the new UCM Land Rover Diagnostic Platform.
Omitec has extended the firmly established tool of choice, the Land Rover T4, which is the OE standard diagnostic platform for all vehicles to the current Range Rover. The new UCM Land Rover is designed for use on the very latest Land Rover vehicles such as Discovery 3 and the Range Rover Sport.
VOSA choose OmiSmoke as their diesel vehicle spot-check smokemeter.
Omitec, manufacturers of high performance diagnostics equipment have now released Version 13 Software to their range OmiScan (handset based) and OmiPro (PC Based) scan tools. Version 13 features software application updates to: Alfa Romeo, Citroën, Fiat, Ford, MG Rover, Peugeot, Renault, Vauxhall as well as intensive application additions to BMW.
More information.
XPart spotlights Omitec as one of their product partners for MG Rover specific diagnostic equipment and also a wide range of products and services to enhance the capabilities of XPart AutoService centres.
NAC MG (UK) launches its all new Vehicle Information & Diagnostics System powered by Omitec Group.
In order to support the commercial launch of the new MG-TF 2-seater sports car NAC MG (UK) has announced that they will introduce an all new Vehicle Information and Diagnostic System at their dealers called the MG-GDS (Global Diagnostic System) developed by Omitec,
Omitec, suppliers of garage test equipment and diagnostics to the automotive market have supplied VOSA with their portable Diesel Smokemeter, the OmiSmoke for roadside ‘spot checks’ on vehicle emissions. VOSA has pledged to assist the UK in its mission to reduce greenhouse gas emissions to 12.5% below 1990 levels in line with the Kyoto commitment and move towards a 20% reduction in CO2 emissions below 1990 levels by 2010, hence the arrival of the spot checks to take the worst polluting vehicles off the road and to make the motoring public aware of the importance of maintaining vehicles and keeping to the legal emission limits all year, and not just for the MOT.
Omitec Group is pleased to announce that it has acquired the entire share capital of P-TEC Automotive Limited. P-TEC is asignificant supplier of electrical and electronic consultancy to the UK car companies ....
The Omitec and Crypton Directors are pleased to announce that the merger of the following companies: Crypton Limited, Autodiagnos Limited, Autodiagnos GmbH, and Dieseltune Limited with the Omitec Group.


Omitec has received recognition for its popular OmiScan diagnostic tool from PMM magazine. Richard Bowler, PMM Editor presented the diagnostic ‘Top Product’ award during the recent Mechanex Exhibition at Sandown Park in Surrey. John Watkins, Omitec Chairman said, “This is the second time that OmiScan has won the diagnostic ‘Top Product’ award, we are delighted. Being based on reader response is true testimony to how the professional technician feels about OmiScan.”


Omitec has been awarded the prestigious Motor ‘Top 20’ award for its OmiNspect CAN based reset tool. The judging panel announced the award winners at a special luncheon hosted by Motor magazine and John Watkins, Omitec Chairman was delighted to accept the award on behalf of the whole Omitec Team.

Omitec has launched an updated and revised range of emissions products including a combined PC based gas and smoke unit, PC based stand alone Gas, non PC based Gas and stand alone diesel smoke meter for both car and commercial use. Designed with MOT stations and garages in mind the new range includes a complete redesign of the trolley featuring a unique smoked acrylic front door allowing the operator to monitor the equipment at all times whilst offering protection from dust and dirt in the workshop. The new designed trolley also includes a 17 inch TFT flat screen monitor on a purpose designed bracket to allow maximum use of the available work surface. All of the equipment is approved for use in MOT stations and can be supplied with a 5 year ‘all inclusive’ support package including calibrations, service, updates and warranty.

Following the success of the OmiPro Dealer level diagnostic tools for Land Rover and MG Rover Omitec has launched a joint kit covering both of these brands. The OmiPro is the only diagnostic product available that has been developed in conjunction with the vehicle manufacturers delivering true dealer level functionality to the independent garage trade.

Omitec will once again be exhibiting at Mechanex Sandown Park on 21st and 22nd November. This show will see the official launch of Omitec’s new range of Smart Battery Testers and Smart Multimeters and provide the first opportunity for garages to try the products first hand.
Visitors to Stand 83/84 will also be able to take part in the Omitec competition to win an OmiNspect EOBD scan tool.

Omitec has launched a range of battery testers to suit everyone from the apprentice technician to the most advanced professional. There are two smart battery testers in the range, the 5300 series and the 5500 series which also has an optional printer.

Omitec is pleased to announce the launch of a unique range of smart one touch multi meters, designed to automatically select the correct measurement value for the job in hand.
The revolutionary technology takes away the guesswork and makes testing a circuit or component as simple as pushing the power button. The smart multimeter requires no training, just press the power button, touch the leads to the component or circuit being tested and the unit instantly displays the correct measurement values.

Omitec is pleased to announce the release of Version 11 software for OmiScan and OmiPro.

Richard Perriman, was this weekend crowned ‘Bright Spark’ Champion Technician of the Year 2006 competition – the search for the UK’s best technician.

As technicians across the country are busily putting pen to paper in the search for the Champion Technician of the Year 2006, the competition prize purse has just grown to nearly £15K thanks to Omitec.

Omitec is pleased to announce the relocation of its Training Facilities into a more central location in Long Hanborough near Oxford. The new centre has more spacious facilities than the Devizes site and also carries the IMI seal of approval.

At the ATS & CV Show at the NEC on the 25th April to the 27th April, Omitec showcased its range of products on Stand 1268. There were a number of interactive demonstrations giving garages the opportunity not only to see the range of products but also try them out for themselves.
More information
Omitec is pleased to announce the OmiTraining programme for the forthcoming year.
Omitec training courses are now IMI approved and Q.A.A. accredited giving all candidates access to either associate of full membership of the Institute of the Motor Industry. Furthermore, all courses are delivered at IMIM approved training facilities including Omitec’s own training school in Oxford.

Omitec, the UK’s leading independent diagnostic and test equipment manufacturer are again attending Automechanika in Frankfurt this September.
Omitec can be found at their usual location, Hall 8 Stand E0.8. The company will be talking to OE manufacturers about their bespoke solutions including Engineering Development Tools, On Vehicle Electronics, Hybrid Vehicle Technologies and Wiring Harness Design, all of which are manufactured from idea to final product in-house.
The company will also display products for their aftermarket division such as the OmiCheck, the tool that extracts live data and fault codes from the control modules, and the OmiScan; Omitec’s flagship diagnostic tool.
If you are interested in Omitec’s range of products and services, they would be delighted to welcome you on stand. Should you wish to make an official appointment please contact Katherine Murphy on +44 (0) 7917 710508.
With registrations for Champion Technician of the Year hitting record highs, it has been confirmed that leading diagnostic tool provider Omitec, has joined Ferodo as a co-sponsor.